Replacement Sponge - PH100 Iron Stand

Replacement Sponge for PH-100 Soldering Iron Stand

Top-quality sponge material that will take the heat and not break down prematurely. Multiple slits in the sponge allow for excess solder to be wiped away. Never use dry, always moisten prior to use.

Features

• Overall approximate size - 2-1/2 x 2-1/2 inches.
• Ships compressed to 1/16-inch thick.
• Expands when wet to 5/8-inch thick.
• Use often to wipe the hot iron tip.
• Slotted on one side ( for more grabs).
• Rinse after each use.