Vase Cap 2-1/2 inch Brass Vented

Vase Cap 2-1/2 inch Brass Vented

Vase Cap for your lampshades made of die-cast metals with a Brass finish.

Traditional and decorative look with a flatter profile and multiple vented areas.

Use this product with the existing brass colour or change it to black or copper. To change the vase cap colour 1) Remove all oxidation with super fine steel wool. 2) Apply flux to the surface of the vase cap. 3) Carefully apply a thin layer of solder 4) Apply black or copper patina.

Vase Cap 2-1/2 inch Brass Vented

Measurements in inches

• Diameter - 2-1/2
• Height - 3/8
• Finish - Brass