Standard 80 Grit Blade Kit

Standard 80 Grit Blade Kit

Mega Blade Kit

Mega Blade Kit

Separating 80 Grit Blade Kit

$189.50
Availability: Out of stock
SKU
GEM 1043

Gemini Separating 80 Grit Blade Kit


Separating Blade - This blade is the same as a standard blade but it comes apart for cutting out the center of glass without using an entrance cut. You must first drill a hole. Consult your DVD for hole drilling instructions.

  • Blade Shape: Round 1.8mm (1/14") Diameter
  • Grit:  is aggressive.
  • Material Thickness Capacity: 3/8", normal use is 1/8" art glass, 1/4" soft wall tile.
  • What to Avoid: Do not use for ceramic tile, 3/8" fused glass pieces, or thick material in general.
  • Average Blade Life: 40-60 hours
  • Made in the USA. Use only genuine Gemini replacement parts. Failure do do so voids warranty. 

Gemini Taurus 3 blades - FYI - Important Information:

1) All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan, and anything that has a similar density to these materials.

2) All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn.

3) Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an optimum speed for each blade with each material; you can feel it while you are cutting. Sensitivity to this issue promotes long blade life. Find that cutting point at which you get maximum cutting speed with minimal pressure.