The perfect kiln for fusing glass tiles and panels.
The square design makes this kiln ideal for tile and sushi plate sizes.
Plugs into 120V household voltage so it is ready to go right out of the box.
The Size
The FireBox 14 kiln shelf can accommodate a
12 x 12-inch square, circular plate or panel.
Its 6-inch depth allows you to use up to 4" deep slump molds.
This kiln is for single-layer firing only.
The Controller
GlassFire Mode allows you to create a program simply by choosing your technique and speed. It’s that easy!
Write your own firing programs with up to 8 Segments using Ramp and Hold. You can now store up to 5 programs.
Adjust temperatures or hold times while the kiln is firing using Add Time or Add Temp or simply select Anneal Now to set your project and begin annealing it.
KMLT Controller Video similar to the GlassMaster LT Controller
Plugs Into Household Voltage
With the FireBox 14 you just take it out of the box, plug it into any spare 120V grounded outlet you have in the house and you are ready to start fusing.
Stay Cool Handle
Glass fusers are always lifting their lids when their kilns are hot to check on their project. The wooden handle on the FireBox 14 stays cool even when the kiln is at peak temperature.
The Warranty
Unlike most warranties, Skutt's covers Parts and Labor.
Never Pro-Rated.
Serviced by the most extensive, knowledgeable and talented distributor network in the industry.
Backed by Skutt's mission statement: “We help you make great things”.
Warranty Information To view, click HEREClick HERE to hide the insturction, or to view or print, click HERE
Warranty
SKUTT CERAMIC PRODUCTS, INC. warrants this product to be free from defects in materials and workmanship for two full years from the date of the first retail purchase from an authorized Skutt dealer.
What Skutt Will Do: Skutt will repair or replace, at is expense, any defective part upon return, freight prepaid, to any authorized Skutt Service center.
What is Not Covered: This warranty does not cover (1) any defect not reported to an authorized Skutt dealer or distributor within 10 days of discovery; (2) Type K Thermocouples; (3) any damage caused by overfiring; (4) products subjected to abnormal strain, freight damage, neglect, abuse, improper storage, failure to follow instructions, or products altered from factory standard condition; (5) products whose identification number has been changed; (6) failures of, or failures caused by, parts or accessories not manufactured or supplied by Skutt Ceramic Products; (7) kilns used for purposes other than firing ceramic materials; (8) kilns used for reduction or salt firing; and (9) elements in “PK” model kilns.
How To Obtain Warranty Service: Notify your Skutt dealer or distributor within 10 days of discovery of any defect. Deliver any defective part, freight prepaid, to an authorized Skutt service center. A list of Skutt service centers may be obtained from your dealer or from Skutt Ceramic Products, Inc. at the address and telephone number below.
Other Limitations: ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING PROPERTY DAMAGE, LOST PROFITS, LOSS OF USE, OR OTHER ECONOMIC LOSS, ARE EXCLUDED TO THE FULL EXTENT PERMITTED BY STATE LAW. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Dealers are not authorized to modify this Warranty or to make any additional commitments. Skutt will not be responsible for promises not contained in this Warranty.
State Law Rights: This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
6441 S.E. JOHNSON CREEK BLVD, PORTLAND, OREGON 97206 (503) 774-6000
How to Request Warranty Service
All repair work must be authorized, either by Skutt, or by an authorized Skutt Distributor before the work is done. If you believe your kiln is going to require warranty servicing, the first step is to call the Distributor from whom you purchased the kiln. If they are unable to provide or coordinate service, call Skutt Ceramic Products and ask for our Technical Service Department. 503-774-6000
Skutt has one of the most extensive networks of Distributors in the country. However, not all areas have a trained kiln technician. We realize that re-packaging and shipping your kiln is not a realistic option for most of our customers. Many of our Distributors have trained kiln technicians either on staff or with which they contract. Often times these technicians will travel to your business or home to do the repair. Skutt will pay them for their time on the job. It is your responsibility to pay them for their travel time to and from your location.
PLEASE REGISTER YOUR WARRANTY AT WWW.SKUTT.COM under the “Contact Us” tab to streamline future warranty requests. You will need your SERIAL NUMBER, MODEL NAME, VOLTAGE, and PHASE. All of this information can be found on the SERIAL PLATE, which is located on the side of your control box.
And So Much More
When you are buying a Skutt kiln, you are not just buying the equipment, you are also buying the service that comes before and after the sale. From the moment Skutt cuts the first brick, to the day you open the box and the day you are ready to retire it, Skutt's reputation is on the line.
The Warranty
Chamber Capacity
Contents List
