Handy Hanger - pack of 6 pairs (12 hangers)

Handy Hanger - pack of 6 pairs (12 hangers)

The handiest little hanger for all your metal-framed panels. 

Ideally suited for most U-channel hard metals like zinc, brass, or copper. Hangers are inserted into the U channel and soldered into place. 

Directions for the Handy Hanger

• All framing is done before the handy hanger inserts are installed.
• Handy hanger inserts are to be installed inside all zinc, brass or copper U-channel frames.
• The tab is inserted into the opening, leaving only the eye exposed.
• The handy hanger and the opening are fluxed,
• Heat is applied with the tip of the iron causing solder to flow the length of the hanger.
• The solder is meant to attach the hanger to the channel.
• Becomes an integral part of the finished project.
• After the solder has cooled, check your work by pulling on the hanger with pliers